A Space & astronomy forum. SpaceBanter.com

Go Back   Home » SpaceBanter.com forum » Space Science » Space Shuttle
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Hand-Flying Reentry



 
 
Thread Tools Display Modes
  #1  
Old January 16th 18, 05:31 AM posted to sci.space.shuttle
Scott M. Kozel[_2_]
external usenet poster
 
Posts: 160
Default Hand-Flying Reentry

Reading a book about the X-15 program. Says that the pilots
hand-flew the reentry on the missions to space, the highest
mission was 67 miles and several minutes outside of the
atmosphere. Initial planning was for missions as high as
180 miles; that would obviously have been a much longer and
higher speed reentry, I wonder if the pilot could hand-fly
it? Don't think there was any automated way to do it back
in the 1960s.

Would it be possible for the pilots to hand-fly a space
shuttle reentry? Or would an automatic system be required
given the exacting parameters on a reentry from orbit?
  #2  
Old January 16th 18, 12:32 PM posted to sci.space.shuttle
Jeff Findley[_6_]
external usenet poster
 
Posts: 2,307
Default Hand-Flying Reentry

In article ,
says...

Reading a book about the X-15 program. Says that the pilots
hand-flew the reentry on the missions to space, the highest
mission was 67 miles and several minutes outside of the
atmosphere. Initial planning was for missions as high as
180 miles; that would obviously have been a much longer and
higher speed reentry, I wonder if the pilot could hand-fly
it? Don't think there was any automated way to do it back
in the 1960s.


Actually there were electronics to help fly the aircraft. I Believe
these were all analog (you can actually do a lot with analog control
systems). But, there was no "modern" digital autopilot that would fly
the entire reentry for them.

Cite:

Experience with the X-15 Adaptive Flight Control System
https://www.nasa.gov/centers/dryden/...main_H-618.pdf

Would it be possible for the pilots to hand-fly a space
shuttle reentry? Or would an automatic system be required
given the exacting parameters on a reentry from orbit?


The pilot was trained to fly the shuttle manually during pretty much all
stages of flight. But you can't fly a space shuttle with zero
computers. The space shuttle has a digital control system (i.e. fly by
wire). There were no cables connecting the flight controls directly to
the control surfaces. Control surfaces were hydraulic and powered by
the shuttle's APUs.

That's why the shuttle had 4 redundant computers to control it (in case
of hardware failure). It also had a fifth computer with completely
different, but minimal, flight control software in case a software
failure caused the 4 main computers to fail.

Jeff
--
All opinions posted by me on Usenet News are mine, and mine alone.
These posts do not reflect the opinions of my family, friends,
employer, or any organization that I am a member of.
  #3  
Old January 19th 18, 05:58 AM posted to sci.space.shuttle
Scott M. Kozel[_2_]
external usenet poster
 
Posts: 160
Default Hand-Flying Reentry

On Tuesday, January 16, 2018 at 6:32:51 AM UTC-5, Jeff Findley wrote:
In article ,
says...

Reading a book about the X-15 program. Says that the pilots
hand-flew the reentry on the missions to space, the highest
mission was 67 miles and several minutes outside of the
atmosphere. Initial planning was for missions as high as
180 miles; that would obviously have been a much longer and
higher speed reentry, I wonder if the pilot could hand-fly
it? Don't think there was any automated way to do it back
in the 1960s.


Actually there were electronics to help fly the aircraft. I Believe
these were all analog (you can actually do a lot with analog control
systems). But, there was no "modern" digital autopilot that would fly
the entire reentry for them.

Cite:

Experience with the X-15 Adaptive Flight Control System
https://www.nasa.gov/centers/dryden/...main_H-618.pdf

Would it be possible for the pilots to hand-fly a space
shuttle reentry? Or would an automatic system be required
given the exacting parameters on a reentry from orbit?


The pilot was trained to fly the shuttle manually during pretty much all
stages of flight. But you can't fly a space shuttle with zero
computers. The space shuttle has a digital control system (i.e. fly by
wire). There were no cables connecting the flight controls directly to
the control surfaces. Control surfaces were hydraulic and powered by
the shuttle's APUs.

That's why the shuttle had 4 redundant computers to control it (in case
of hardware failure). It also had a fifth computer with completely
different, but minimal, flight control software in case a software
failure caused the 4 main computers to fail.


One of the books about the X-15 said that reentry had to be flown
very precisely, as even at the best, it was close to the limits for
heating on the airframe, g-forces on the airframe, aerodynamic
forces on the airframe, and g-forces on the pilot. A small amount
of miscalculation could push one or more of them beyond the danger
point.

That is why the limited the altitude flights to around 350,000 feet
or 67 miles.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Flying cars wallpaper called 'Become Flying Car' (organize desktopicons around in picture) [email protected] Policy 0 November 7th 08 08:18 PM
Reentry prize? Ruediger Klaehn Policy 46 May 12th 04 12:07 AM
reentry cavitator Andrew Nowicki Technology 21 November 11th 03 09:15 AM
Re; Gemini 8 reentry Rusty B History 12 August 23rd 03 10:37 PM
Gemini 8 reentry Jan Philips History 5 August 22nd 03 03:51 PM


All times are GMT +1. The time now is 03:59 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 SpaceBanter.com.
The comments are property of their posters.