|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Digital compact camera - low light, low weight, and threaded lens
Has anyone had success in attaching a low weight, low light compact
digital camera to a telescope eyepiece for imaging the night sky? I already have a good attachment using the following ETX-90 Standard Meade lenses Digi-T adapter - http://www.scopetronics.com/dtsystems.htm Olympus C4040Z camera Cam2com software - http://www.sabsik.com/ The problem is that the camera is slightly heavier than I would like. At 420 grammes it seems a bit of a load on the telescope. I'd rather avoid counterweights so I'm looking for a more modern and lighter camera. The basic requirement is that it have a threaded attachment like the one shown below so I can couple it directly to the eyepiece, and be low weight. One that has good low light performance would be good. The threading on which the Digi-T adapter mounts is just visible in this link showing the lens adapter tube that couples the Digi-T to the camera. https://emporium.olympus.com/innards...sku=200558-410 In case anyone hasn't tried it, the threaded mounting is far more solid and far easier to use than those awkward rods-and-rings bits of meccano that hold the camera via its tripod attachment. -- James |
#2
|
|||
|
|||
Digital compact camera - low light, low weight, and threaded lens
James Harris wrote:
In case anyone hasn't tried it, the threaded mounting is far more solid and far easier to use than those awkward rods-and-rings bits of meccano that hold the camera via its tripod attachment. -- James Hi James It's far too quiet so here are some random thoughts: Unfortunately not many compact digital cameras seem to have a lens thread. The weight of cameras also seems to follow a maker trend. Weight suggest quality to the ignorant and impressionable. Think Nikon SLRs and Olympic weight lifters! I thought the Olympus SLRs more than heavy enough! My £200 Canon Ixus 860IS feels like half a brick at 155g. My £70 Vivitar 7388S feels much lighter at 135g. I'd prefer half that for a pocket camera. My Olde Sony P71 weighed 274g and now feels like two whole bricks taped together with a postage stamp for a screen. The Vivitar goes everywhere with me. Even on cycle rides. The Canon only goes out in the car or around the house and garden. I have been delighted with the results from both cameras. The Vivitar is a little jewel for the asking price with a huge screen. A spare battery is always handy. The Canon battery lasts literally for months. The Vivitar for a couple of weeks. Both get lots of exercise so I needed a larger hard drive. Thanks to these three digital cameras I now have 12,000 image files worth 10GB. Not all astronomy, I hasten to add. If you go into the menus you can set the lens not to retract. The lens housing could then be used in a simple tubular, eyepiece adaptor. Though I'd want a short lanyard to catch the camera if it slipped. Somebody ought to do a plastic eyepiece adaptor with a proper clamping ring for various compact camera lenses. Rather like they do for webcams but without the tiny thread. I made a simple adaptor for my Sony tripod screw hole using a piece of alloy plate and a Tufnol block bored in the lathe to fit the outside of my 2" focussing mount. I used it for eyepiece projection on the Sun during a transit with the Sony lens set to stay out and a full aperture solar foil filter on my 6" refractor. Regards Chris http://fullerscopes.blogspot.com/ |
#3
|
|||
|
|||
Digital compact camera - low light, low weight, and threaded lens
On 16 Sep, 21:22, James Harris wrote:
Has anyone had success in attaching a low weight, low light compact digital camera to a telescope eyepiece for imaging the night sky? I already have a good attachment using the following ETX-90 Standard Meade lenses Digi-T adapter -http://www.scopetronics.com/dtsystems.htm Olympus C4040Z camera Cam2com software -http://www.sabsik.com/ The problem is that the camera is slightly heavier than I would like. At 420 grammes it seems a bit of a load on the telescope. I'd rather avoid counterweights so I'm looking for a more modern and lighter camera. The basic requirement is that it have a threaded attachment like the one shown below so I can couple it directly to the eyepiece, and be low weight. One that has good low light performance would be good. The threading on which the Digi-T adapter mounts is just visible in this link showing the lens adapter tube that couples the Digi-T to the camera. https://emporium.olympus.com/innards...sku=200558-410 In case anyone hasn't tried it, the threaded mounting is far more solid and far easier to use than those awkward rods-and-rings bits of meccano that hold the camera via its tripod attachment. Asking on wider range of newsgroups. Maybe others have already gone down this road. Not sure if this will invoke derision from the CCD folks.... :-) -- James |
#4
|
|||
|
|||
Digital compact camera - low light, low weight, and threaded lens
On 19 Sep, 00:03, "Chris.B" wrote:
James Harris wrote: In case anyone hasn't tried it, the threaded mounting is far more solid and far easier to use than those awkward rods-and-rings bits of meccano that hold the camera via its tripod attachment. -- James Hi James It's far too quiet so here are some random thoughts: It is. Thanks for adding comments. Unfortunately not many compact digital cameras seem to have a lens thread. The weight of cameras also seems to follow a maker trend. Weight suggest quality to the ignorant and impressionable. Think Nikon SLRs and Olympic weight lifters! I thought the Olympus SLRs more than heavy enough! My £200 Canon Ixus 860IS feels like half a brick at 155g. My £70 Vivitar 7388S feels much lighter at 135g. I'd prefer half that for a pocket camera. My Olde Sony P71 weighed 274g and now feels like two whole bricks taped together with a postage stamp for a screen. That's only 20g of difference. Does it really change the perceived weight so much? The Vivitar goes everywhere with me. Even on cycle rides. The Canon only goes out in the car or around the house and garden. I have been delighted with the results from both cameras. The Vivitar is a little jewel for the asking price with a huge screen. A spare battery is always handy. The Canon battery lasts literally for months. The Vivitar for a couple of weeks. Both get lots of exercise so I needed a larger hard drive. Thanks to these three digital cameras I now have 12,000 image files worth 10GB. Not all astronomy, I hasten to add. If you go into the menus you can set the lens not to retract. The lens housing could then be used in a simple tubular, eyepiece adaptor. Though I'd want a short lanyard to catch the camera if it slipped. Somebody ought to do a plastic eyepiece adaptor with a proper clamping ring for various compact camera lenses. Rather like they do for webcams but without the tiny thread. You mean to clamp to the lens barrel? That could work. I still prefer the idea of mounting on a thread but your suggestion sounds far better than the tripod mount. I made a simple adaptor for my Sony tripod screw hole using a piece of alloy plate and a Tufnol block bored in the lathe to fit the outside of my 2" focussing mount. I used it for eyepiece projection on the Sun during a transit with the Sony lens set to stay out and a full aperture solar foil filter on my 6" refractor. OK. Here's another mounting method using the tripod mount that sounds similar (but not such good value!) http://www.scopetronics.com/kit-images/type3-dt.htm -- James |
#5
|
|||
|
|||
Digital compact camera - low light, low weight, and threadedlens
The following site might help James:
http://www.weasner.com/etx/menu.html Regards, John. James Harris wrote: Has anyone had success in attaching a low weight, low light compact digital camera to a telescope eyepiece for imaging the night sky? I already have a good attachment using the following ETX-90 Standard Meade lenses Digi-T adapter - http://www.scopetronics.com/dtsystems.htm Olympus C4040Z camera Cam2com software - http://www.sabsik.com/ The problem is that the camera is slightly heavier than I would like. At 420 grammes it seems a bit of a load on the telescope. I'd rather avoid counterweights so I'm looking for a more modern and lighter camera. The basic requirement is that it have a threaded attachment like the one shown below so I can couple it directly to the eyepiece, and be low weight. One that has good low light performance would be good. The threading on which the Digi-T adapter mounts is just visible in this link showing the lens adapter tube that couples the Digi-T to the camera. https://emporium.olympus.com/innards...sku=200558-410 In case anyone hasn't tried it, the threaded mounting is far more solid and far easier to use than those awkward rods-and-rings bits of meccano that hold the camera via its tripod attachment. -- James |
#6
|
|||
|
|||
Digital compact camera - low light, low weight, and threaded lens
On 16 Sep, 21:22, James Harris wrote:
Has anyone had success in attaching a low weight, low light compact digital camera to a telescope eyepiece for imaging the night sky? I already have a good attachment using the following ETX-90 Standard Meade lenses Digi-T adapter -http://www.scopetronics.com/dtsystems.htm Olympus C4040Z camera Cam2com software -http://www.sabsik.com/ The problem is that the camera is slightly heavier than I would like. At 420 grammes it seems a bit of a load on the telescope. I'd rather avoid counterweights so I'm looking for a more modern and lighter camera. The basic requirement is that it have a threaded attachment like the one shown below so I can couple it directly to the eyepiece, and be low weight. One that has good low light performance would be good. The threading on which the Digi-T adapter mounts is just visible in this link showing the lens adapter tube that couples the Digi-T to the camera. https://emporium.olympus.com/innards...sku=200558-410 In case anyone hasn't tried it, the threaded mounting is far more solid and far easier to use than those awkward rods-and-rings bits of meccano that hold the camera via its tripod attachment. One thing you might try is to remove the batteries and use the external 120V power adapter. 4AAAs weigh 120 gm. Even if that leaves a heavy camera, it'll lighten the requirement for the counterweights, if you feel you still need those. |
#7
|
|||
|
|||
Quote:
There are some great low light pocket cameras available. The Kodak v1073 is a "sleeper", it has a big sensor for a pocket camera and not overly ambitious resolution (megapixels). It also does great low light HD movies. I have a one page list of low light pocket cameras on my website. Just go to http://www.findbesttech.com. This is not spam, I do not automate my messages and I only refer to my website when it is directly pertinent to the discussion. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
THE WEIGHT OF LIGHT | Pentcho Valev | Astronomy Misc | 5 | October 11th 07 06:58 AM |
ASTRO: SPIE Press book on camera lenses; Camera Lenses: From Box Camera to Digital | Richard Crisp[_1_] | Astro Pictures | 0 | September 9th 07 04:43 PM |
Build your 13.1" light-weight truss DOB! | Szaki | Amateur Astronomy | 5 | September 2nd 04 07:24 PM |
Ouch! A red light on the weight shaft of a GEM? | Wayne Watson | Amateur Astronomy | 13 | October 1st 03 05:54 AM |
Digital Camera as Light-Pollution Meter: Initial Results | Tony Flanders | Amateur Astronomy | 4 | September 17th 03 12:11 PM |