|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Solar Power Satellite Concept
I have developed a system that masses 600+ tonnes and is lofted into
orbit by a reusable vehicle derived from our experience with the External Tank only. The satellite consists of a 5.2 km diameter inflatable concentrator. This concentrator focuses sunlight on to a 125 m diameter CPV/Emitter array. This array beams IR laser energy at 900 nm to 8,000 receivers across the visible face of the Earth. Each beam generates 1.25 MW at the 22 m diameter receiver using silicon within a water filled lens array. A total of 10,000 MW. http://www.scribd.com/doc/35439593/S...-Satellite-GEO At $0.042 per kWh each satellite generates $300 million per month in revenues. Four satellites, including the launcher fleet and operations to place four satellites cost less than $14.4 billion - the annual income of four satellites on GEO. Multiple RS-68 pump sets at the base of each ET derived airframe feed an aerospike engine at the base of each airframe - which work together in groups of 7 to create a multi-stage launcher that places the satellite on orbit. The satellite deploys on LEO and uses solar powered ion engines - which give it 30 years of station keeping capability - to add 4.33 km/ sec to its velocity to take up an orbit at GEO. There the station beams power to 8,000 stationary receivers across the visible face of the Earth. http://www.scribd.com/doc/31261680/Etdhlrlv-Addendum http://www.scribd.com/doc/30943696/ETDHLRLV |
#2
|
|||
|
|||
Solar Power Satellite Concept
William Mook wrote:
I have developed a system that masses 600+ tonnes and is lofted into orbit by a reusable vehicle derived from our experience with the External Tank only. What kind of reception did it receive when you presented it at this year's International Space Development Conference/Space Investment Summit in Chicago this past May? They had a two day Space Solar Power Symposium this year. Jim Davis |
#3
|
|||
|
|||
Solar Power Satellite Concept
On Aug 7, 2:33*am, Jim Davis wrote:
William Mook wrote: I have developed a system that masses 600+ tonnes and is lofted into orbit by a reusable vehicle derived from our experience with the External Tank only. What kind of reception did it receive when you presented it at this year's International Space Development Conference/Space Investment Summit in Chicago this past May? They had a two day Space Solar Power Symposium this year. Jim Davis I didn't present. |
#4
|
|||
|
|||
Solar Power Satellite Concept
William Mook wrote:
What kind of reception did it receive when you presented it at this year's International Space Development Conference/Space Investment Summit in Chicago this past May? They had a two day Space Solar Power Symposium this year. I didn't present. Any particular reason why not? Surely you would have received much more useful feedback there than you could expect here? Jim Davis |
#5
|
|||
|
|||
Solar Power Satellite Concept
On Aug 7, 9:59*am, Jim Davis wrote:
William Mook wrote: What kind of reception did it receive when you presented it at this year's International Space Development Conference/Space Investment Summit in Chicago this past May? They had a two day Space Solar Power Symposium this year. I didn't present. Any particular reason why not? Surely you would have received much more useful feedback there than you could expect here? Jim Davis Mook is only a good talker, not a team doer or much less an actual leader. His feedback needs are more intended as mind teasers and diversions than anything else. If I were running NASA/DARPA, I'm not sure if I could safely fit William Mook into any one of our think tanks, because he'd always insist upon running the whole show and doing everything extremely large. ~ BG |
#6
|
|||
|
|||
Solar Power Satellite Concept
On Aug 7, 7:08*pm, Brad Guth wrote:
On Aug 7, 9:59*am, Jim Davis wrote: William Mook wrote: What kind of reception did it receive when you presented it at this year's International Space Development Conference/Space Investment Summit in Chicago this past May? They had a two day Space Solar Power Symposium this year. I didn't present. Any particular reason why not? Surely you would have received much more useful feedback there than you could expect here? Jim Davis Mook is only a good talker, not a team doer or much less an actual leader. His feedback needs are more intended as mind teasers and diversions than anything else. *If I were running NASA/DARPA, I'm not sure if I could safely fit William Mook into any one of our think tanks, because he'd always insist upon running the whole show and doing everything extremely large. *~ BG Jim, I wasn't asked to present anything. If I were asked, I would certainly have presented something. Brad, as usual, what you say makes no sense on so many levels, its useless to respond to what you think you said. I will say however, most large container ships and tankers top 100,000 tons. My External Tank derived RLV lifts 695 tons into LEO. That's not extremely large by any stretch of the imagination. It is just large enough to get the job done economically. The $44 billion program I have outlined elsewhere will return a value of $275 billion the day it is switched on by selling energy at $0.06 per kWh anywhere on the world. |
#7
|
|||
|
|||
Solar Power Satellite Concept
William Mook wrote:
I have developed a system that masses 600+ tonnes and is lofted into orbit by a reusable vehicle derived from our experience with the External Tank only. Really? Where is the hardware? Oh that's right. That's "I've designed on paper." We've been done this road before Mook. Bend metal, get someone to bend metal or go away. -- Greg Moore Ask me about lily, an RPI based CMC. |
#8
|
|||
|
|||
Solar Power Satellite Concept
On Aug 7, 3:42*pm, "Greg D. Moore \(Strider\)"
wrote: William Mook wrote: I have developed a system that masses 600+ tonnes and is lofted into orbit by a reusable vehicle derived from our experience with the External Tank only. Really? *Where is the hardware? Oh that's right. That's "I've designed on paper." We've been done this road before Mook. *Bend metal, get someone to bend metal or go away. -- Greg Moore Ask me about lily, an RPI based CMC. I didn't know this Usenet/newsgroup was a certified shop-class for fly- by-rocket expertise. Where's your better rocket or satellite of bent metal? ~ BG |
#9
|
|||
|
|||
Solar Power Satellite Concept
Brad Guth wrote:
On Aug 7, 3:42 pm, "Greg D. Moore \(Strider\)" wrote: William Mook wrote: I have developed a system that masses 600+ tonnes and is lofted into orbit by a reusable vehicle derived from our experience with the External Tank only. Really? Where is the hardware? Oh that's right. That's "I've designed on paper." We've been done this road before Mook. Bend metal, get someone to bend metal or go away. -- Greg Moore Ask me about lily, an RPI based CMC. I didn't know this Usenet/newsgroup was a certified shop-class for fly- by-rocket expertise. Where's your better rocket or satellite of bent metal? When I claim to have developed one, I'll be more than willing to show it. Notice, I don't make those claims. There have been others here who HAVE made those claims and some have actually bent metal. Mook simply wears out keyboards. ~ BG -- Greg Moore Ask me about lily, an RPI based CMC. |
#10
|
|||
|
|||
Solar Power Satellite Concept
On Aug 7, 7:44*pm, "Greg D. Moore \(Strider\)"
wrote: Brad Guth wrote: On Aug 7, 3:42 pm, "Greg D. Moore \(Strider\)" wrote: William Mook wrote: I have developed a system that masses 600+ tonnes and is lofted into orbit by a reusable vehicle derived from our experience with the External Tank only. Really? Where is the hardware? Oh that's right. That's "I've designed on paper." We've been done this road before Mook. Bend metal, get someone to bend metal or go away. -- Greg Moore Ask me about lily, an RPI based CMC. I didn't know this Usenet/newsgroup was a certified shop-class for fly- by-rocket expertise. *Where's your better rocket or satellite of bent metal? When I claim to have developed one, I'll be more than willing to show it. Notice, I don't make those claims. There have been others here who HAVE made those claims and some have actually bent metal. Mook simply wears out keyboards. *~ BG -- Greg Moore Ask me about lily, an RPI based CMC. I've done it, actually bent steel and aluminum on the huge Chicago- type metal presses in Houston @ Rawson Koenig, Inc, and changed dies, unjammed the punch/cutter of the mighty Salvagnini: http://www.salvagnini.com After getting one of these beasts aloft, how far would one or more of these kinds actually progress towards mass producing after an NEO'd refiner, or orbitally-based fabrication facility... (Guess I'll have to talk to somebody at U.S.Steel... ) American "All for one, one for all" - Dumas (1802 - 1870) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Europe's Largest Space Corp to launch Solar Power Satellite | Jonathan | Policy | 8 | March 13th 10 08:05 PM |
..Space Energy Inc plans to launch prototype Space Solar Power Satellite | Jonathan | History | 10 | December 22nd 09 04:17 AM |
latest solar power satellite designs | [email protected] | Technology | 1 | March 25th 06 09:51 AM |
Satellite Solar Power Debris risk | Alex Terrell | Policy | 2 | November 10th 04 06:58 PM |
"Reinventing the Solar Power Satellite" paper | Geoffrey A. Landis | Technology | 17 | June 24th 04 09:35 PM |