#1
|
|||
|
|||
"clf" wrote in message
.verio.net... I am wondering - not having seen any of my astronomy books in a while - My telescope isn't a really expensive one - but it does ok for me for now. It is one of the 4.5" reflectors commonly sold. With that said, you know about how long the tube is. Then, there are scopes with a wider tube yet seem somewhat shorter. My question is - since I"ve been lost in this field for some time - what determines the "length" of a telescope tube? To that end, could one say - use a tube maybe only a foot to two feet long tops and any size mirror - but the bigger the mirror - the more light gathering and thus better viewing? I"m thinking of a tube of about 2' and an 8" or so mirror. I said the question was dumb, but I've been away from this for so long, I'm trying to get my brain in gear with it - again. Thanks in advance for replies The diameter of the tube is dependent on the diameter of the objective, plus enough extra diameter from mirror edge to tube wall to minimize tube (thermal) currents. The length of the tube is dependent on the focal length of the objective (the mirror in your case). The longer the focal length of the objective, the longer the tube must be. And the shorter the focal length, the shorter the tube... Each objective will require a given length of tube to match it's focal length... You can't pick and choose your tube length independently of the focal length, though you CAN pick and chose a telescope with longer or shorter focal length... Shorter tubes can be good from a handling standpoint, but a short focal length Newtonian reflector will show stronger and stronger coma, and it will get closer to the optical axis, the shorter the focal ratio... Coma is an aberration that makes the stars in the outer portion of the field look more like seagulls than pinpoints of light... -- Jan Owen To reach me directly, remove the Z, if one appears in my e-mail address... Latitude: 33.662 Longitude: -112.3272 |
#2
|
|||
|
|||
It depends on the F stop of the mirror. I've seen 8inch scopes that have
shorter tubes because they are F4 / f5, while my Babylon 8 has a tube that's as long as I am tall, it's a F8 8 inch scope. -- The Lone Sidewalk Astronomer of Rosamond Telescope Buyers FAQ ------ http://home.inreach.com/starlord Astronomy Net Online Gift Shop http://www.cafepress.com/astronomy_net "clf" wrote in message .verio.net... I am wondering - not having seen any of my astronomy books in a while - My telescope isn't a really expensive one - but it does ok for me for now. It is one of the 4.5" reflectors commonly sold. With that said, you know about how long the tube is. Then, there are scopes with a wider tube yet seem somewhat shorter. My question is - since I"ve been lost in this field for some time - what determines the "length" of a telescope tube? To that end, could one say - use a tube maybe only a foot to two feet long tops and any size mirror - but the bigger the mirror - the more light gathering and thus better viewing? I"m thinking of a tube of about 2' and an 8" or so mirror. I said the question was dumb, but I've been away from this for so long, I'm trying to get my brain in gear with it - again. Thanks in advance for replies |
#3
|
|||
|
|||
The length of the tube also depends on the design of the scope. From
what you mentioned (a tube of about 2' and an 8" or so mirror), it is most probably a Schmidt Cassegrain (SCT). In this case, the focal length of the scope will be much longer than the physical length of the tube. For two scopes of same diameter and using the same eyepiece, the longer focal length one will give a higher magnification but narrower field of view. C. H. Yeung clf wrote: I am wondering - not having seen any of my astronomy books in a while - My telescope isn't a really expensive one - but it does ok for me for now. It is one of the 4.5" reflectors commonly sold. With that said, you know about how long the tube is. Then, there are scopes with a wider tube yet seem somewhat shorter. My question is - since I"ve been lost in this field for some time - what determines the "length" of a telescope tube? To that end, could one say - use a tube maybe only a foot to two feet long tops and any size mirror - but the bigger the mirror - the more light gathering and thus better viewing? I"m thinking of a tube of about 2' and an 8" or so mirror. I said the question was dumb, but I've been away from this for so long, I'm trying to get my brain in gear with it - again. Thanks in advance for replies |
#4
|
|||
|
|||
The "Slower" scopes like my 8inch F8 are easyer to aline too.
-- The Lone Sidewalk Astronomer of Rosamond Telescope Buyers FAQ http://home.inreach.com/starlord Astronomy Net Online Gift Shop http://www.cafepress.com/astronomy_net "Chi-hung Yeung" wrote in message ... The length of the tube also depends on the design of the scope. From what you mentioned (a tube of about 2' and an 8" or so mirror), it is most probably a Schmidt Cassegrain (SCT). In this case, the focal length of the scope will be much longer than the physical length of the tube. For two scopes of same diameter and using the same eyepiece, the longer focal length one will give a higher magnification but narrower field of view. C. H. Yeung clf wrote: I am wondering - not having seen any of my astronomy books in a while - My telescope isn't a really expensive one - but it does ok for me for now. It is one of the 4.5" reflectors commonly sold. With that said, you know about how long the tube is. Then, there are scopes with a wider tube yet seem somewhat shorter. My question is - since I"ve been lost in this field for some time - what determines the "length" of a telescope tube? To that end, could one say - use a tube maybe only a foot to two feet long tops and any size mirror - but the bigger the mirror - the more light gathering and thus better viewing? I"m thinking of a tube of about 2' and an 8" or so mirror. I said the question was dumb, but I've been away from this for so long, I'm trying to get my brain in gear with it - again. Thanks in advance for replies |
#5
|
|||
|
|||
dumb question
I am wondering - not having seen any of my astronomy books in a while -
My telescope isn't a really expensive one - but it does ok for me for now. It is one of the 4.5" reflectors commonly sold. With that said, you know about how long the tube is. Then, there are scopes with a wider tube yet seem somewhat shorter. My question is - since I"ve been lost in this field for some time - what determines the "length" of a telescope tube? To that end, could one say - use a tube maybe only a foot to two feet long tops and any size mirror - but the bigger the mirror - the more light gathering and thus better viewing? I"m thinking of a tube of about 2' and an 8" or so mirror. I said the question was dumb, but I've been away from this for so long, I'm trying to get my brain in gear with it - again. Thanks in advance for replies |
#6
|
|||
|
|||
Shorter tubes can be good from a handling standpoint, but a short focal
length Newtonian reflector will show stronger and stronger coma, and it will get closer to the optical axis, the shorter the focal ratio... Coma is an aberration that makes the stars in the outer portion of the field look more like seagulls than pinpoints of light... ------ There are other issues involved with "fast scopes", ie F4-F6 and even higher. One is that the angle of the "light cone" entering the eyepiece is very steep. To handle this steep light cone and still provide reasonably sharp images across the field of view requires fancy and expensive eyepieces. With Newtonians, collimation becomes difficult, I own an F4 Newt but I don't recommend it except for portability reasons. F5, or F6 is much nicer IMHO. As others have said, there a variety of scope types, some like Schmitt Cassegrain, Schmitt-Newtonian and MAKs can provide a longer focal length in a shorter package, they have their own set of problems but in general, these are sound designs that are worth considering. On the other hand, there is a class of scope that uses a fast (F4)spherical mirror and a built-in Barlow/corrector to achieve a long focal length in a short package. The most common of these are the 4.5 inch "Short Tube Newtonians." With a tube length of under 20 inches but a focal ratio of F8 or so, these scopes offer a compact design but marginal performance. The standard 4.5 inch F8 Newtonian has a OTA that is about 3 feet long but will give nice sharp stars across the field of view. THere are larger versions, some are 6 inch scopes and often sold on Ebay under a variety of labels, Baytronix is a common one. These scopes and low priced Ebay scopes are wise to avoid. Jon Isaacs |
#7
|
|||
|
|||
Shorter tubes can be good from a handling standpoint, but a short focal
length Newtonian reflector will show stronger and stronger coma, and it will get closer to the optical axis, the shorter the focal ratio... Coma is an aberration that makes the stars in the outer portion of the field look more like seagulls than pinpoints of light... ------ There are other issues involved with "fast scopes", ie F4-F6 and even higher. One is that the angle of the "light cone" entering the eyepiece is very steep. To handle this steep light cone and still provide reasonably sharp images across the field of view requires fancy and expensive eyepieces. With Newtonians, collimation becomes difficult, I own an F4 Newt but I don't recommend it except for portability reasons. F5, or F6 is much nicer IMHO. As others have said, there a variety of scope types, some like Schmitt Cassegrain, Schmitt-Newtonian and MAKs can provide a longer focal length in a shorter package, they have their own set of problems but in general, these are sound designs that are worth considering. On the other hand, there is a class of scope that uses a fast (F4)spherical mirror and a built-in Barlow/corrector to achieve a long focal length in a short package. The most common of these are the 4.5 inch "Short Tube Newtonians." With a tube length of under 20 inches but a focal ratio of F8 or so, these scopes offer a compact design but marginal performance. The standard 4.5 inch F8 Newtonian has a OTA that is about 3 feet long but will give nice sharp stars across the field of view. THere are larger versions, some are 6 inch scopes and often sold on Ebay under a variety of labels, Baytronix is a common one. These scopes and low priced Ebay scopes are wise to avoid. Jon Isaacs |
#8
|
|||
|
|||
What determines the tube length in a Newtonian reflector or in a
refractor is the focal length of the mirror or the lens. The longer the focal length, the longer the distance must be between the eyepiece and the mirror (or lens), and hence the longer the tube that you need. The diameter of the lens or mirror, as you say, affects light gathering--the wider it is, the more light you take in. Light gathering affects how dim an object you can see, and how well the scope can resolve objects. The focal length affects magnification. The magnification that you get is the ratio of the focal lengths of the primary mirror (or lens) and the eyepiece. Thus, if you have a mirror with a 600mm focal length, and you use a 20mm eyepiece, the magnification is 600/20 or 30x. You'll also see the term focal ratio or "f ratio". This is the focal length of the mirror/lens divided by its diameter. Thus, a mirror with a 100mm diameter and a 600mm focal length has a focal ratio of f/6. In general, faults in the optics (such as the coma inherent in a Newtonian's primary mirror or the chromatic aberration inherent in the lens of a refractor) are more of a problem the shorter the focal ratio is. But a scope designer has to balance that against the longer tube needed for higher f ratios. Clear skies, -Paul W. On Mon, 22 Aug 2005 22:17:19 -1200, "clf" wrote: I am wondering - not having seen any of my astronomy books in a while - My telescope isn't a really expensive one - but it does ok for me for now. It is one of the 4.5" reflectors commonly sold. With that said, you know about how long the tube is. Then, there are scopes with a wider tube yet seem somewhat shorter. My question is - since I"ve been lost in this field for some time - what determines the "length" of a telescope tube? To that end, could one say - use a tube maybe only a foot to two feet long tops and any size mirror - but the bigger the mirror - the more light gathering and thus better viewing? I"m thinking of a tube of about 2' and an 8" or so mirror. I said the question was dumb, but I've been away from this for so long, I'm trying to get my brain in gear with it - again. Thanks in advance for replies ---------- Remove 'Z' to reply by email. |
#9
|
|||
|
|||
"Jan Owen" wrote in message
news:C7wOe.70245$DW1.39416@fed1read06... "clf" wrote in message .verio.net... I am wondering - not having seen any of my astronomy books in a while - My telescope isn't a really expensive one - but it does ok for me for now. It is one of the 4.5" reflectors commonly sold. With that said, you know about how long the tube is. Then, there are scopes with a wider tube yet seem somewhat shorter. My question is - since I"ve been lost in this field for some time - what determines the "length" of a telescope tube? To that end, could one say - use a tube maybe only a foot to two feet long tops and any size mirror - but the bigger the mirror - the more light gathering and thus better viewing? I"m thinking of a tube of about 2' and an 8" or so mirror. I said the question was dumb, but I've been away from this for so long, I'm trying to get my brain in gear with it - again. Thanks in advance for replies The diameter of the tube is dependent on the diameter of the objective, plus enough extra diameter from mirror edge to tube wall to minimize tube (thermal) currents. The length of the tube is dependent on the focal length of the objective (the mirror in your case). The longer the focal length of the objective, the longer the tube must be. And the shorter the focal length, the shorter the tube... Each objective will require a given length of tube to match it's focal length... You can't pick and choose your tube length independently of the focal length, though you CAN pick and chose a telescope with longer or shorter focal length... Shorter tubes can be good from a handling standpoint, but a short focal length Newtonian reflector will show stronger and stronger coma, and it will get closer to the optical axis, the shorter the focal ratio... Coma is an aberration that makes the stars in the outer portion of the field look more like seagulls than pinpoints of light... -- Jan Owen To reach me directly, remove the Z, if one appears in my e-mail address... Latitude: 33.662 Longitude: -112.3272 Thank you very much for that reply. To further my past - I got into Astronomy at like 12 and was into it up into my 20s, but then life started happening. I'm now in my 40s, so though I have the scope and stashed away (I hope) my books - as you can see it has been a long while and after that many years, one can tend to forget. Now, I have some time to break back into the hobby and have to a minor degree - even having taken pics with my somewhat cheapo digital camera through the scope. I'm hoping to get into it more as I go, and look to maybe get a better scope down the road. I believe one of my books "was" or well - with my memory - maybe it was just a book I had read from a library - was on the subject of building telescopes. Perhaps it did explain that principle, but again - it has been so long. Thanks again! I appreciate it. clf |
#10
|
|||
|
|||
Thanks to all for your replies, I appreciate them. I don't post in here
much, but I've been reading many posts with interest. This is one of the best groups I could have found. Thanks again. Hopefully one day I can post to help someone. clf |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OT simple and probably dumb math question | Dazzer | UK Astronomy | 9 | December 6th 03 10:36 PM |
ODDS AGAINST EVOLUTION (You listenin', t.o.?) | Lord Blacklight | Astronomy Misc | 56 | November 21st 03 02:45 PM |
PX question | Bored Huge Krill | Astronomy Misc | 4 | August 10th 03 02:54 AM |