|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
I need help understanding the setting circles on cg4 mount
I dont know how to set the RA on the CG4 mount. There is one circle 0-24 and
another 0-12. What I dont understand is when you turn the scope do both circles move? And if I am setting them at Polaris, what should both circles read? Please send info. I am stymied. Thanks john |
#2
|
|||
|
|||
"n3drk" wrote in message ... I dont know how to set the RA on the CG4 mount. There is one circle 0-24 and another 0-12. What I dont understand is when you turn the scope do both circles move? And if I am setting them at Polaris, what should both circles read? Please send info. I am stymied. Thanks Polaris is not a good place to set these circles. It is so close to the Celestial pole, that even a tiny error in position, will give a massive RA error. Technically, the circles on the mount, form a simple(!) 'slide rule' style calculator. The 12 calibrations, are the months of the year (with days as well, but most are only calibrated in perhaps three or four 'multi day' steps for each month). The 24 calibrations are 'time'. The same dial is used to read RA (which is normally measured in the same 'time' units). There should also be an alignment mark, on the body of the mount, with numbers each side of this. These correspond to the time shift east or west of GMT, at which you are working. It is possible, to 'dial in' your current date, align to the correct time zone, and then turn the scope to a particular RA value on the 24 calibration dial, and be close to the desired object. However generally, this is not worth worrying about. The best normal way to work, is to simply polar align the scope, and then aim it at an object with a known RA, preferably close to the celestial equator (rather than the celestial pole). Turn the 24 calibration dial till it shows the correct reading, and you can then move to another object in the sky, by moving the scope, till it's RA reading is shown. The 'calculator' feature is useful when dealing with daytime objects, or if nothing any reasonable distance from the celestial pole if visible, but it is normally quicker and easier to just use the 'nearby known object' setting. Best Wishes |
#3
|
|||
|
|||
"n3drk" wrote in message ... I dont know how to set the RA on the CG4 mount. There is one circle 0-24 and another 0-12. What I dont understand is when you turn the scope do both circles move? And if I am setting them at Polaris, what should both circles read? Please send info. I am stymied. Thanks Polaris is not a good place to set these circles. It is so close to the Celestial pole, that even a tiny error in position, will give a massive RA error. Technically, the circles on the mount, form a simple(!) 'slide rule' style calculator. The 12 calibrations, are the months of the year (with days as well, but most are only calibrated in perhaps three or four 'multi day' steps for each month). The 24 calibrations are 'time'. The same dial is used to read RA (which is normally measured in the same 'time' units). There should also be an alignment mark, on the body of the mount, with numbers each side of this. These correspond to the time shift east or west of GMT, at which you are working. It is possible, to 'dial in' your current date, align to the correct time zone, and then turn the scope to a particular RA value on the 24 calibration dial, and be close to the desired object. However generally, this is not worth worrying about. The best normal way to work, is to simply polar align the scope, and then aim it at an object with a known RA, preferably close to the celestial equator (rather than the celestial pole). Turn the 24 calibration dial till it shows the correct reading, and you can then move to another object in the sky, by moving the scope, till it's RA reading is shown. The 'calculator' feature is useful when dealing with daytime objects, or if nothing any reasonable distance from the celestial pole if visible, but it is normally quicker and easier to just use the 'nearby known object' setting. Best Wishes |
#4
|
|||
|
|||
Polaris is not a good star to set your circles by. Find a star in the
soulth that you know. Put the star in the field of view in your scope. Then move the the circles and set it to that stars RA. Do that with the 0-24 circle. You should have a marker to show where the scope is pointed. You should have another marker that does not move. That is your meridian marker which will now show you local siderael time. However you can only do this if your scope is polar allined. |
#5
|
|||
|
|||
Polaris is not a good star to set your circles by. Find a star in the
soulth that you know. Put the star in the field of view in your scope. Then move the the circles and set it to that stars RA. Do that with the 0-24 circle. You should have a marker to show where the scope is pointed. You should have another marker that does not move. That is your meridian marker which will now show you local siderael time. However you can only do this if your scope is polar allined. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dob setting circles | Tom Wales | Amateur Astronomy | 7 | May 14th 04 05:29 PM |
EQ-5 Mount - Setting Circles Advice | Neil Morley | Amateur Astronomy | 4 | October 20th 03 09:30 PM |
EQ-5 Mount - Setting Circles Advice | Neil Morley | UK Astronomy | 1 | October 20th 03 09:30 PM |
Digital Setting Circles | Von Fourche | Misc | 2 | August 27th 03 10:20 AM |
No AutoStar + how to use setting circles | premal | Amateur Astronomy | 7 | August 12th 03 10:07 AM |