|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How to check the collimination of binoculars?
In another thread on ALCON, Shawn Grant, said:
"The venders at ALCON were great. I bought an awesome pair of 15 X 70 binoculars from Bill Burgess. He even made sure they were perfectly collimated before I purchased them." Although refractors are much foregiving to misalignment than reflectors, what's an easy field test to determine if your binos are misaligned? - Kurt |
#2
|
|||
|
|||
How to check the collimination of binoculars?
"PrisNo6" wrote in message om... In another thread on ALCON, Shawn Grant, said: "The venders at ALCON were great. I bought an awesome pair of 15 X 70 binoculars from Bill Burgess. He even made sure they were perfectly collimated before I purchased them." Although refractors are much foregiving to misalignment than reflectors, what's an easy field test to determine if your binos are misaligned? - Kurt Hi Kurt, The easiest way that I've found is to, while looking through the binoculars, cover one of the two binocular objective lenses with your hand for about twenty seconds or so. While you are doing this both eyes are to remain opened. Then quickly remove the hand which is covering one side of the binocular and observe if the image is "apart" and slowly comes together as your "brain" collimates the two misaligned views. In a perfectly collimated binocular when you remove your hand the two images would be perfectly aligned immediately. This may not be the easiest or the most accurate way, but it's the standard by which I keep my binos collimated. Martin |
#3
|
|||
|
|||
How to check the collimination of binoculars?
Although refractors are much foregiving to misalignment than reflectors, what's an easy field test to determine if your binos are misaligned? - Kurt Easy. Put the binoculars on a tripod. Find a telephone or electrical wire strung between two posts about 100 yards away and focus on it. If the binoculars are grossly misaligned the wire wont meet in the middle of the FOV. This is the gross test. For the fine test, walk back, away from the binoculars about a foot, while still looking through both eyepieces. if the wire doesn't meet in the middle of both eyepieces, then they are mildly misaligned and as long as they meet when your eyes are right at the eyepieces this shouldn't be a problem. Take Care, JAS |
#4
|
|||
|
|||
How to check the collimination of binoculars?
PrisNo6 wrote:
In another thread on ALCON, Shawn Grant, said: "The venders at ALCON were great. I bought an awesome pair of 15 X 70 binoculars from Bill Burgess. He even made sure they were perfectly collimated before I purchased them." Although refractors are much foregiving to misalignment than reflectors, what's an easy field test to determine if your binos are misaligned? There's alignment of each half, which is just like aligning a refractor telescope, and is seldom a concern; and there's alignment of the halfs wrt each other. The latter is the usual concern with binoculars. Try http://www.cloudynights.com/howtos2/binoc-collimatin.htm http://www.cloudynights.com/howto/15x70%20bear%20collimation.htm http://www.dvaa.org/ATM/BearCol.html The first site is for general alignment of binoculars. The latter two sites are for specific binoculars but may also provide some insight for your model. |
#5
|
|||
|
|||
How to check the collimination of binoculars?
what's an easy field test to determine if your binos are
misaligned? - Kurt It's easiest if your binoculars are mounted. To check total barrel alignment, look at the edges of the field of view in each barrel. Objects at least 100 to 200 yards away should appear in the same place at the edges, up, down left and right. That's the first thing. That checks fov, and I think it's the best way to check fov. Now you need to check to see if the images are merged. You can try to look at a very small brightly lit spot in the center of the fov. Personally I do not trust the daytime test to check merged images, but I sometimes try it. I have never found a daytime alignment for merging images that has been exactly on when I checked it on a star. To do a more precise test to see if images are merged there is no test better than the star test. Let your eyes relax. Back away from the binocs maybe 6" or a little more, maybe 12". You will eventually get your eyes practiced enough so that you can see a separate star image in each eyepiece. Now is the time to let your eyes relax. The images will start to come together. Care must be taken here and it comes with practice. As the images get real close your eyes will try to force them together. With practice you will find that you can bring the images to the closest approach and they will stop. At this point you can see the severity of mis-collimation. If you do this on a wide double star (vDra, nu Draco is 62") of known separation, you can determine exactly how much off it is measured in arcmin. There are several terms of mis-collimation: Vertical (the worst), Divergence = spread, Convergence = crosseyed. There are different limits of error for each. The most common error people make when they try to merge the images in their mis-collimated binoculars is this. They merge the images but they mis-align the field of view from one barrel to the other. If your images are merged but you do not see the same field of view in each barrel then your binoculars are not collimated. I hope this helps. I wrote one of the articles noted above. It is more in depth than this explanation. It pertains to any common standard porro prism binocular. You can find it at http://www.cloudynights.com/howtos2/...collimatin.htm edz |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pentagon Using Spy Satellites To Check ISS For Damage | Brian Gaff | Space Shuttle | 10 | December 5th 03 12:03 AM |
Pentagon Using Spy Satellites To Check ISS For Damage | Brian Gaff | Space Station | 9 | December 4th 03 11:56 PM |
star magnitude and binoculars | Ravensong | Amateur Astronomy | 30 | July 19th 03 01:37 AM |
Celstron Skymaster Binoculars, Are they good ? | AP | Amateur Astronomy | 3 | July 15th 03 03:14 AM |
Buying Meade used LX200 Telescope -how to check if it works OK | nicte | Amateur Astronomy | 0 | July 2nd 03 10:28 AM |