#51
|
|||
|
|||
46P, can't see
Paul Schlyter:
That's one good reason to avoid buying American cars... but yes, I do have two sets of drill bits, one metric and one in inches. ?? American-built cars have used metric measure for some years now. You're thinking maybe of the '67 Plymouth? -- I agree with almost everything that you have said and almost everything that you will say in your entire life. usenet *at* davidillig dawt cawm |
#52
|
|||
|
|||
46P, can't see
On 12/12/2018 17:22, Paul Schlyter wrote:
On Wed, 12 Dec 2018 06:01:14 -0800 (PST), StarDust wrote: Canada is metric , so as Mexico, been there , roads are in km units. When will the US join? They signed up for SI very early on 1866 but never quite got around to implementing it. USGS used a metric length standard but almost no-one else. US short measure "gallons" led to the Gimli glider incident. Odd that they blame their weird and arcane units on the English. BTW the comet is now quite bright and an easy binocular object about half the size of the moon in a dark sky. It should get brighter with each passing day and will be pretty close to the Pleiades next week. -- Regards, Martin Brown |
#53
|
|||
|
|||
46P, can't see
Martin Brown:
BTW the comet is now quite bright and an easy binocular object about half the size of the moon in a dark sky. It should get brighter with each passing day and will be pretty close to the Pleiades next week. Ah, back to business. For your viewing pleasure, 46P/Wirtanen on 10 December from Maryland, USA: https://www.flickr.com/photos/primeval/31330206277. -- I agree with almost everything that you have said and almost everything that you will say in your entire life. usenet *at* davidillig dawt cawm |
#54
|
|||
|
|||
46P, can't see
On Wednesday, December 12, 2018 at 2:02:45 PM UTC-8, Davoud wrote:
Paul Schlyter: I see. You are stuck with that outdated inefficient system of units of feet and inches. While the rest of the world has gone metric, the USA, Burma and Liberia prefer to stick to their outdated systems of measurements. Let me disabuse you of that notion. The Système international is widely used in the USA. About the only place it is not used is in figuring the driving distance to the supermarket. Science, industry, education, all of the activities where the Système international is important employ it. -- I agree with almost everything that you have said and almost everything that you will say in your entire life. usenet *at* davidillig dawt cawm I worked for a few companies in the last 30 years, incl. a large aerospace co. for 12 years and none were using metric system. We used to get drawings from France, Germany in metric, all had to be converted to english measuring system. |
#55
|
|||
|
|||
46P, can't see
On Wednesday, December 12, 2018 at 2:07:30 PM UTC-8, Davoud wrote:
Paul Schlyter: That's one good reason to avoid buying American cars... but yes, I do have two sets of drill bits, one metric and one in inches. ?? American-built cars have used metric measure for some years now. You're thinking maybe of the '67 Plymouth? -- I agree with almost everything that you have said and almost everything that you will say in your entire life. usenet *at* davidillig dawt cawm Cars from the 80's! Last time I owned one, ever since I only owned Japanese or German cars! |
#56
|
|||
|
|||
46P, can't see
On Wednesday, December 12, 2018 at 2:57:49 PM UTC-8, Martin Brown wrote:
On 12/12/2018 17:22, Paul Schlyter wrote: On Wed, 12 Dec 2018 06:01:14 -0800 (PST), Canada is metric , so as Mexico, been there , roads are in km units. When will the US join? They signed up for SI very early on 1866 but never quite got around to implementing it. USGS used a metric length standard but almost no-one else. US short measure "gallons" led to the Gimli glider incident. Odd that they blame their weird and arcane units on the English. BTW the comet is now quite bright and an easy binocular object about half the size of the moon in a dark sky. It should get brighter with each passing day and will be pretty close to the Pleiades next week. -- Regards, Martin Brown It mag 4.7 now! https://theskylive.com/46p-info |
#57
|
|||
|
|||
46P, can't see
On Wed, 12 Dec 2018 17:02:40 -0500, Davoud wrote:
Paul Schlyter: I see. You are stuck with that outdated inefficient system of units of feet and inches. While the rest of the world has gone metric, the USA, Burma and Liberia prefer to stick to their outdated systems of measurements. Let me disabuse you of that notion. The Systme international is widely used in the USA. About the only place it is not used is in figuring the driving distance to the supermarket. Science, industry, education, all of the activities where the Systme international is important employ it. Sadly, the use of SI units of mass, force, and length remains rather uncommon in most U.S. industry. Manufacturing plans are almost always in decimal inches. Aerospace, including much of the space program, remains locked into non-metric units for distance, force, and mass. And virtually all architecture and construction is still using feet-inches-eighths. And while science texts use metric, I'm afraid most others, including math, still use non-metric... including things like teaspoons and quarts. |
#58
|
|||
|
|||
46P, can't see
StarDust wrote:
I just asked a simple question, how big is comet? You answered with math calculations. I know what arc minutes and angles are, used it all my life, I use to be a Journey man machinist and later mfg. engineer. This is not a support forum. And you cannot do astronomy without math. And for the last time: Please trim your quotes and get a real name. -- PointedEars Twitter: @PointedEars2 Please do not cc me. / Bitte keine Kopien per E-Mail. |
#59
|
|||
|
|||
46P, can't see
Thomas 'PointedEars' Lahn wrote:
StarDust wrote: I just asked a simple question, how big is comet? You answered with math calculations. I know what arc minutes and angles are, used it all my life, I use to be a Journey man machinist and later mfg. engineer. This is not a support forum. And you cannot do astronomy without math. Besides, I have not only given you the way to calculate, but also *I calculated the result for you*. *As if* this were a support forum where you can be lazy and make demands. -- PointedEars Twitter: @PointedEars2 Please do not cc me. / Bitte keine Kopien per E-Mail. |
#60
|
|||
|
|||
46P, can't see
StarDust wrote:
On Wednesday, December 12, 2018 at 1:23:14 AM UTC-8, Mike Collins wrote: On Wednesday, December 12, 2018 at 12:17:29 AM UTC-8, Paul Schlyter wrote: On Tue, 11 Dec 2018 23:59:16 -0800 (PST), I meant common fractions, what we use in daily life, 1/2, 1/4, 3/8 etc... Get it? Carpenter don't use 167/200? 1/16" is good enough to cut a 2x4! Try to measure 167/200" with a measuring tape from Home Depot, eh? Some how you have difficulty understanding things? I see. You are stuck with that outdated inefficient system of units of feet and inches. While the rest of the world has gone metric, the USA, Burma and Liberia prefer to stick to their outdated systems of measurements. No, I don't want to measure 167/200 inches with a measuring tape from Home Depot which probably only measures inches anyway. I'd much prefer to measure 0.835 cm with a **metric** ruler, measuring tape or other measuring device. That's what we who live in the modern part of the world do. On metric measuring devices the subdivisions are in powers of 10, not powers of 2, so decimal fractions are then very handy to use. Welcome to the world outside the USA! Yes, it does exist! For real!!! Also England and Australia use the old system! They even drive in the left side of the road there too! LOL! Now days measuring tapes has both system of units, but still the inch is the mostly used, not metric! Progress , I guess! If you buy an American car and like to be a weekend mechanic, you have to buy tons of tools, in fractions units, 1/2" wrench or 1/4" drill bit or 16 oz. hammer etc... Crazy, but more profit in selling tools! U.K. industry is metric. Even when the Imperial system was in use the people you call machine operators thought in “thous” - thousands or an inch. That's not metric! Machinist use thousands or ten thousands of an inch all the time? The later one is tight, thats for me - Tool maker! Mostly surface grinding use that close tolerances, .0002"! My analog calipers and micrometers are made in inches. Digital measuring tools can use both systems, just press a button and enjoy any system of the two! Also, CN or CNC machines are the same way! I all ways used metric, because numerical controlled machines all ways calibrated in metric, so they more accurate 2.5x, specially in circular interpolation! Of course it’s not metric. That’s why I wrote Imperial. It’s all metric now. In fact it’s SI while a lot of US science, particularly in the medical field still uses cgs units. |
Thread Tools | |
Display Modes | |
|
|