Software Question: KStar Linux

I try asking question regarding K Stars (Astronomy Software 4 Linux)
but no one seems to know anything about. I am assuming some Linux user
here may know about it.

Every time I open K-stars it shows fills half the screen toggle
horizon and it very annoying. Is there anyway to make it still while I
navigate from East to West?

http://edu.kde.org/kstars/screens/eclipse05312003.png (see the green
horizon, i wanna some like the way it's this picture) Another words I
wanna shrink horizon.

http://edu.kde.org/kstars/screens/eclipse05312003.png (see the green
horizon, i wanna some like the way it's this picture) Another words I
wanna shrink horizon.

Hi,

You can use the up and down arrow keys on the keyboard to change the
horizon's position. Once you get it the way you want it, exit kstars and
it will remember the new position the next time you open it.

If you go to View | Equatorial Coordinates you can get rid of the
horizontal coordinates altogether.

You can use the + and - keys on the keyboard to zoom in and out and
further adjust the size of your view and the horizon.

Pressing f1 will open up the Kstars manual. It has some more info on
customizing the view, positions, etc.

Good luck,

Josh

http://edu.kde.org/kstars/screens/eclipse05312003.png (see the green
horizon, i wanna some like the way it's this picture) Another words I
wanna shrink horizon.

Hi,

You can use the up and down arrow keys on the keyboard to change the
horizon's position. Once you get it the way you want it, exit kstars and
it will remember the new position the next time you open it.

If you go to View | Equatorial Coordinates you can get rid of the
horizontal coordinates altogether.

You can use the + and - keys on the keyboard to zoom in and out and
further adjust the size of your view and the horizon.

Pressing f1 will open up the Kstars manual. It has some more info on
customizing the view, positions, etc.

Good luck,

Josh

On Mon, 13 Oct 2003 08:59:43 -0700, Deanna Linux wrote:

I try asking question regarding K Stars (Astronomy Software 4 Linux)
but no one seems to know anything about. I am assuming some Linux user
here may know about it.

Every time I open K-stars it shows fills half the screen toggle
horizon and it very annoying. Is there anyway to make it still while I
navigate from East to West?

http://edu.kde.org/kstars/screens/eclipse05312003.png (see the green
horizon, i wanna some like the way it's this picture) Another words I
wanna shrink horizon.

Hello Deanna,

I have not used K-stars but have used XPLNS, you can find it at
google. If you have not tried it already it is very good.

Or try

http://www.astroarts.com/products/xplns


It is of course free and much the same as Redshift for Windows.

On Mon, 13 Oct 2003 16:45:29 +0100, kevin wrote:

On Mon, 13 Oct 2003 08:59:43 -0700, Deanna Linux wrote:

I try asking question regarding K Stars (Astronomy Software 4 Linux)
but no one seems to know anything about. I am assuming some Linux user
here may know about it.

I have not used K-stars but have used XPLNS, you can find it at google.
If you have not tried it already it is very good.

Or try

http://www.astroarts.com/products/xplns

It is of course free and much the same as Redshift for Windows.

Yes, xplns is a superb program. Unfortunately, it can be run only with
glibc 2.2.X. It has not been updated to glibc 2.3.X. Most current linux
distros use the later version of glibc. It installs OK on systems with
glibc 2.3.x but won't run. xplns is available only in binary form as it
includes proprietary codes, thus you cannot compile it in your system
either.

--

Gautam Majumdar

Please send e-mails to

On Mon, 13 Oct 2003 20:28:34 +0100, Gautam Majumdar wrote:

On Mon, 13 Oct 2003 16:45:29 +0100, kevin wrote:

On Mon, 13 Oct 2003 08:59:43 -0700, Deanna Linux wrote:

I try asking question regarding K Stars (Astronomy Software 4 Linux)
but no one seems to know anything about. I am assuming some Linux user
here may know about it.

I have not used K-stars but have used XPLNS, you can find it at google.
If you have not tried it already it is very good.

Or try

http://www.astroarts.com/products/xplns

It is of course free and much the same as Redshift for Windows.

Yes, xplns is a superb program. Unfortunately, it can be run only with
glibc 2.2.X. It has not been updated to glibc 2.3.X. Most current linux
distros use the later version of glibc. It installs OK on systems with
glibc 2.3.x but won't run. xplns is available only in binary form as it
includes proprietary codes, thus you cannot compile it in your system
either.

Right thanks for that I did not know, I checked the link I gave and there
is a package available for Redhat Glibc2.3. I had xplns running fine on
slackware V7 but have recently upgraded to slackware V9 with Glibc2.3
I tried the Redhat package out of desperation but it wont work, I am
probably going to go back to slackware V7 anyway as I have had nothing
but problems with V9.

On Tue, 14 Oct 2003 07:50:54 +0000, kevin wrote:

On Mon, 13 Oct 2003 20:28:34 +0100, Gautam Majumdar wrote:

On Mon, 13 Oct 2003 16:45:29 +0100, kevin wrote:

On Mon, 13 Oct 2003 08:59:43 -0700, Deanna Linux wrote:

I try asking question regarding K Stars (Astronomy Software 4 Linux)
but no one seems to know anything about. I am assuming some Linux user
here may know about it.

I have not used K-stars but have used XPLNS, you can find it at google.
If you have not tried it already it is very good.

Or try

http://www.astroarts.com/products/xplns

It is of course free and much the same as Redshift for Windows.

Yes, xplns is a superb program. Unfortunately, it can be run only with
glibc 2.2.X. It has not been updated to glibc 2.3.X. Most current linux
distros use the later version of glibc. It installs OK on systems with
glibc 2.3.x but won't run. xplns is available only in binary form as it
includes proprietary codes, thus you cannot compile it in your system
either.

Right thanks for that I did not know, I checked the link I gave and there
is a package available for Redhat Glibc2.3. I had xplns running fine on
slackware V7 but have recently upgraded to slackware V9 with Glibc2.3
I tried the Redhat package out of desperation but it wont work, I am
probably going to go back to slackware V7 anyway as I have had nothing
but problems with V9.

Ok my fault, just to put my above post right, the Redhat glibc2.3 package
DOES work on slackware V9, it seems because I was running XFree-3.3 I
had to install the XFree-4.x fonts.


I'll email the author cos he should know this and hopefully he will
add slackware V9 to his list as at the moment he only lists a very
old version.

On Tue, 14 Oct 2003 07:50:54 +0000, kevin wrote:

On Mon, 13 Oct 2003 20:28:34 +0100, Gautam Majumdar wrote:

On Mon, 13 Oct 2003 16:45:29 +0100, kevin wrote:

On Mon, 13 Oct 2003 08:59:43 -0700, Deanna Linux wrote:

I try asking question regarding K Stars (Astronomy Software 4 Linux)
but no one seems to know anything about. I am assuming some Linux user
here may know about it.

I have not used K-stars but have used XPLNS, you can find it at google.
If you have not tried it already it is very good.

Or try

http://www.astroarts.com/products/xplns

It is of course free and much the same as Redshift for Windows.

Yes, xplns is a superb program. Unfortunately, it can be run only with
glibc 2.2.X. It has not been updated to glibc 2.3.X. Most current linux
distros use the later version of glibc. It installs OK on systems with
glibc 2.3.x but won't run. xplns is available only in binary form as it
includes proprietary codes, thus you cannot compile it in your system
either.

Right thanks for that I did not know, I checked the link I gave and there
is a package available for Redhat Glibc2.3. I had xplns running fine on
slackware V7 but have recently upgraded to slackware V9 with Glibc2.3
I tried the Redhat package out of desperation but it wont work, I am
probably going to go back to slackware V7 anyway as I have had nothing
but problems with V9.

Ok my fault, just to put my above post right, the Redhat glibc2.3 package
DOES work on slackware V9, it seems because I was running XFree-3.3 I
had to install the XFree-4.x fonts.


I'll email the author cos he should know this and hopefully he will
add slackware V9 to his list as at the moment he only lists a very
old version.

On Tue, 14 Oct 2003 08:50:54 +0100, kevin wrote:

On Mon, 13 Oct 2003 20:28:34 +0100, Gautam Majumdar wrote:

On Mon, 13 Oct 2003 16:45:29 +0100, kevin wrote:

On Mon, 13 Oct 2003 08:59:43 -0700, Deanna Linux wrote:

I try asking question regarding K Stars (Astronomy Software 4 Linux)
but no one seems to know anything about. I am assuming some Linux
user here may know about it.

I have not used K-stars but have used XPLNS, you can find it at
google. If you have not tried it already it is very good.

Or try

http://www.astroarts.com/products/xplns

It is of course free and much the same as Redshift for Windows.

Yes, xplns is a superb program. Unfortunately, it can be run only with
glibc 2.2.X. It has not been updated to glibc 2.3.X. Most current linux
distros use the later version of glibc. It installs OK on systems with
glibc 2.3.x but won't run. xplns is available only in binary form as it
includes proprietary codes, thus you cannot compile it in your system
either.

Right thanks for that I did not know, I checked the link I gave and
there is a package available for Redhat Glibc2.3. I had xplns running
fine on slackware V7 but have recently upgraded to slackware V9 with
Glibc2.3 I tried the Redhat package out of desperation but it wont work,
I am probably going to go back to slackware V7 anyway as I have had
nothing but problems with V9.

You are right. The site was updated on the 6th of October. I did not
check it after that date. Thanks for pointing out the availability of the
new version.

--

Gautam Majumdar

Please send e-mails to

On Tue, 14 Oct 2003 08:50:54 +0100, kevin wrote:

On Mon, 13 Oct 2003 20:28:34 +0100, Gautam Majumdar wrote:

On Mon, 13 Oct 2003 16:45:29 +0100, kevin wrote:

On Mon, 13 Oct 2003 08:59:43 -0700, Deanna Linux wrote:

I try asking question regarding K Stars (Astronomy Software 4 Linux)
but no one seems to know anything about. I am assuming some Linux
user here may know about it.

I have not used K-stars but have used XPLNS, you can find it at
google. If you have not tried it already it is very good.

Or try

http://www.astroarts.com/products/xplns

It is of course free and much the same as Redshift for Windows.

Yes, xplns is a superb program. Unfortunately, it can be run only with
glibc 2.2.X. It has not been updated to glibc 2.3.X. Most current linux
distros use the later version of glibc. It installs OK on systems with
glibc 2.3.x but won't run. xplns is available only in binary form as it
includes proprietary codes, thus you cannot compile it in your system
either.

Right thanks for that I did not know, I checked the link I gave and
there is a package available for Redhat Glibc2.3. I had xplns running
fine on slackware V7 but have recently upgraded to slackware V9 with
Glibc2.3 I tried the Redhat package out of desperation but it wont work,
I am probably going to go back to slackware V7 anyway as I have had
nothing but problems with V9.

You are right. The site was updated on the 6th of October. I did not
check it after that date. Thanks for pointing out the availability of the
new version.

--

Gautam Majumdar

Please send e-mails to