![]() |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I have a 5" f/8 mirror and desire to build a grab and go scope. Does
anyone have any good sites with plans for building a scope of this size? Thanks, Scott |
#2
|
|||
|
|||
![]()
Scott
Download and install Dale Keller's excellent newtonian design program. http://home.att.net/~dale.keller/atm...t/newtsoft.htm The tube is usually an inch larger in diameter than the primary mirror size. The space from the end of the focuser to the front end of the tube should be at least the diameter of the primary 5" in this case." With aprox 2-3 inches from the end of the primary to the end of the tube. Id use a 1.25 inch focuser vice a 2". Next check out www.astrosystems.biz or http://www.universityoptics.com/ That should get you going. If it were me unless you just want to use a 5" mirror and you want to stay in that range Id sell the 5" and go with a 6" F8 mirror. Mirrors usually come in 6 8 10 inches. Best of luck Rich On Sun, 15 Feb 2004 07:24:37 -0600, "Scott Smith" wrote: I have a 5" f/8 mirror and desire to build a grab and go scope. Does anyone have any good sites with plans for building a scope of this size? Thanks, Scott |
#3
|
|||
|
|||
![]()
Scott
Download and install Dale Keller's excellent newtonian design program. http://home.att.net/~dale.keller/atm...t/newtsoft.htm The tube is usually an inch larger in diameter than the primary mirror size. The space from the end of the focuser to the front end of the tube should be at least the diameter of the primary 5" in this case." With aprox 2-3 inches from the end of the primary to the end of the tube. Id use a 1.25 inch focuser vice a 2". Next check out www.astrosystems.biz or http://www.universityoptics.com/ That should get you going. If it were me unless you just want to use a 5" mirror and you want to stay in that range Id sell the 5" and go with a 6" F8 mirror. Mirrors usually come in 6 8 10 inches. Best of luck Rich On Sun, 15 Feb 2004 07:24:37 -0600, "Scott Smith" wrote: I have a 5" f/8 mirror and desire to build a grab and go scope. Does anyone have any good sites with plans for building a scope of this size? Thanks, Scott |
#4
|
|||
|
|||
![]()
Scott try sidewalk astronomy websearch. The plans can be used with most
smaller newts. It is Ray Cash's site. Clear Skies Richard |
#5
|
|||
|
|||
![]()
Scott try sidewalk astronomy websearch. The plans can be used with most
smaller newts. It is Ray Cash's site. Clear Skies Richard |
#6
|
|||
|
|||
![]()
Thanks for the info!
Scott "Scott Smith" wrote in message . .. I have a 5" f/8 mirror and desire to build a grab and go scope. Does anyone have any good sites with plans for building a scope of this size? Thanks, Scott |
#7
|
|||
|
|||
![]()
Thanks for the info!
Scott "Scott Smith" wrote in message . .. I have a 5" f/8 mirror and desire to build a grab and go scope. Does anyone have any good sites with plans for building a scope of this size? Thanks, Scott |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
roster of telescope making classes | Allan Adler | Astronomy Misc | 3 | February 7th 04 02:31 PM |
Mirror making, 5 micron, and scratches | Rodney | Amateur Astronomy | 8 | December 29th 03 09:03 AM |
thoughts on amateur telescope making | Trane Francks | Amateur Astronomy | 3 | November 27th 03 03:45 PM |
A wacky telescope making idea... | jagbot | Amateur Astronomy | 41 | November 25th 03 01:22 PM |